hey guys,
I'm waiting on the M50 manifold conversion kit to come in. when it arrives, anyone open to helping me with the conversion? i could come out to you or you come to my place (germantown, md)
thanks!
-martin
hey guys,
I'm waiting on the M50 manifold conversion kit to come in. when it arrives, anyone open to helping me with the conversion? i could come out to you or you come to my place (germantown, md)
thanks!
-martin
i'd like to get that done too. how much was the kit and where did u get it from?
reach out to gbauer and mscire who both did it on George's M Roadster at one of the DIYs at Convenience CC
Paul Seto - NCC Board Member & Social Chairman
2011 Mineral White M3 Coupe ZCP
2000 Titanium Silver M Roadster
2011 Space Gray 328ix Sedan
Check out our NCC Facebook Page
i bit the bullet, and bought the kit from eric at m50manifold.com. there was a group buy special on BFC, cost is $205 including the fuel rail cover and shipping.
Paul Seto - NCC Board Member & Social Chairman
2011 Mineral White M3 Coupe ZCP
2000 Titanium Silver M Roadster
2011 Space Gray 328ix Sedan
Check out our NCC Facebook Page
Sams cost even less, i think we were sub $40 or right around there. If you need the monifold get one at a junkyard or of bf.c they usually go from around 60-100ish
The M50 install kit arrived yesterday, anyone want to help out with the install?
When are you thinking of doing it? Do you have tools and space to do it at your place? I haven't done the intake manifold on an S50/S52 (mine came with the correct manifold ), but if I have the time free I'd be happy to help.
Andy Miller
1995 Avusblau M3
1997 Alaskablau 318ti M Sport
I was thinking Saturday 8/15, i have some tools and a garage.
Actually, I'm likely going to be at the DIY at Passport on the 15th. But I'm going mainly to help out, and likely won't be working on my own car. Could be a good time/place to do it.
Andy Miller
1995 Avusblau M3
1997 Alaskablau 318ti M Sport
i'll check with the DIY coordinator and see if they're ok with the manifold swap.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks