I have a small Air Compressor in my garage. I set it to a low PSi setting.
I use Chamois as it takes off the top contaminated wax layer. I burnish my wax (Machine applied multiple coats. Let dry each coat to a haze and apply another on top of it. 4 coats and then finish and buff on the 5th coat) so Chamois uncovers a layer underneath.
You can use canned Air Spray, but that can get expensive. You can use a shop vac in blow mode to blow out the water. It is filtered air.
http://www.detailersdomain.com/index...on=Custom&ID=9
Bookmarks