01/16/2010 - DIY @ AtSpeed Motorsport

[gkrea1]

Andy, I've volunteered at the past three DIY days since moving to the area from Michigan. If you could use a hand again, I'll gladly fill my trunk with tools and head over. I'll also send you a PM.

-Greg
89 735iA
85 M639 (still in MI)

[MBW635]

Was there going to be a DIY on 1/23 at Convenience Car Care? Any idea on when the schedule will be updated past February? Looking forward to making it to one of these soon.

Thanks!

Maurice
86 635

[neatloaf]

Andy, I've volunteered at the past three DIY days since moving to the area from Michigan. If you could use a hand again, I'll gladly fill my trunk with tools and head over. I'll also send you a PM.

-Greg
89 735iA
85 M639 (still in MI)

I wouldn't mind a hand on my E39 M5. I'm aiming to do all fluids except for coolant(already done two months ago).

[gkrea1]

I wouldn't mind a hand on my E39 M5. I'm aiming to do all fluids except for coolant(already done two months ago).

No problem. Fluids are pretty straightforward. Keep in mind that Andy will have final say about with whom I work. I usually help the folks with zero experience, and then lend a hand with a couple others at the same time. It's good that you're keeping that motor healthy. I remember seeing it on a stand at the Detroit Auto Show it's first year -- the exhaust headers are glorious bundles of snakes.

[M3peat]

Is this still open for walk ups? I'd like to do some fluid changes (oil,tranny, brake) and possibly a spring perch replacement (aftermarket susp).