Results 1 to 6 of 6

Thread: Diy#2 2008, Ccc

                  
   
  1. #1

    Diy#2 2008, Ccc

    Wow. DIY's are an extremely great way to spend an weekend day. Where do I start? The events leading up to the day were, for me and a few other Z3 guys, centered around a project that it seems every Z3 owner should be doing or has done. That is replacing their subframe bushings. This is unfortunately not as simple as removing the old and replacing with a new.

    There are several challenges that present themselves before you swap these things out. You will have quite a bit of dismantling under the rear section to do, which is why having a lift and tools available is so important. That's where the DIY came in. What a better way to do this job with the backing of other owners who have experience, a great shop to work in, and tools you might need along the way, oh and let's not forget; the lift.

    Once you get the whole tail end disassembled and dropped, now you must remove the old bushings. Some guys will tell you that you can torch them out, but it usually means completely removing the subframe to not toast your car. The other option is to use a specialized tool that removes the bushing in a matter of minutes with no sweat and no fire. Procuring the tool was something that was a significant investment for any one individual. I approached the NCC to see if they could support the cost and have the DIY attendees, who were changing their subframe bushings, rent the tool for their session. After a few conversations with a few different NCC DIY folks, the agreement was made that the tool could be provided. Special thaanks to Alan and Tony for their persistence and follow-thru to get the tool in for DIY #2. Without the tool, the project would likely be a painful, dangerous, and need quite a bit of additional labor.

    During the event Joe Brannon attended so that he could walk some of us through the bushing replacement. Without his help, there was little chance we could have pulled it off timely. Thanks Joe for giving up your Saturday, as it was highly appreciated. Jonathan and Ethan, both Z3M coupe owners, also stopped by to throw some wrenches as more than likely their future plans will be to install these replacement bushings.

    We were able to get done with time to spare and able to take test drives to check our upgrade. Personally, I think the car takes on a different attitude of road communication and rigidity. All in all, the day was a success for the bushing changers and will likely be the start of many future Z3 bushing replacements.

    Again, thanks to all who participated in this event and helped us with getting this tool.


    Craig Brickner
    Last edited by Car54; 02-17-2008 at 09:25 PM.
    Car54 ...well, now Car52

    Craig Brickner

  2. #2
    Senior Member John in VA's Avatar
    Join Date
    Jan 2005
    Location
    Leesburg
    Posts
    1,024
    Sounds like a good time. I know the rear subframe bushing tool for the E28s makes all the difference in getting the job done.
    We are so fortunate to have the DIY program - wish I could get free more often to take advantage, or just hang with the gang!
    John in VA

    '74 2002tii
    '85 535i
    '86 535i
    '00 328i
    '02 325xi
    '03 530i
    '06 330ci ZHP
    '15 228i M Sport

  3. #3
    Senior Member
    Join Date
    Sep 2006
    Location
    District of Columbia
    Posts
    195

    Arrow Diy #2 2008, Ccc

    Craig & John,

    Many thanks for your comments, especially on the proposed DIY Special Tool Program. We're happy that things went smoothly, and thanks so much to our mentor Joe Brannon for providing excellent guidance.

    We'll be seeking official approval of this new DIY initiative at the National Capital Chapter BoD meeting Wednesday.

    Cheers,
    Alan

  4. #4
    Senior Member 1996 328ti's Avatar
    Join Date
    Jun 2004
    Location
    Greenville, SC
    Posts
    3,434
    I sure could use a DIY program by me.
    I need to replace my struts on my E30 and now see I need to replace my valve cover gasket on my M52. Oil around the spark plugs.
    Easy jobs when you have someone looking over your shoulder.

    Many of you know how lucky you are.
    To those who never took part, come out and see what it's all about.
    And if you are not a DIYer, think about using these shops that give us their facilities.
    ...steven
    BMW CCA #146825

    318ti.org | bmwcca.org/forum

  5. #5

    Diy #2 2008, Ccc

    Craig,

    Would you mind if I ran this as a letter to the editor in the May/June dB? If that's cool, send me your member number off-line.

    db-editor<at>nccbmwcca.org

    Thanks man, I'll be calling you, Jonathan, and Tony when I'm ready to do the RSBs on my iX!

    Cheers!

    Rob
    1988 325iX
    2001 325Xi Touring
    1982 Toyota Landcruiser

  6. #6
    Senior Member mcoupemindy's Avatar
    Join Date
    Jul 2007
    Location
    Haymarket, VA 20169
    Posts
    1,931
    Quote Originally Posted by Munchenman2 View Post
    Craig & John,

    Many thanks for your comments, especially on the proposed DIY Special Tool Program. We're happy that things went smoothly, and thanks so much to our mentor Joe Brannon for providing excellent guidance.

    We'll be seeking official approval of this new DIY initiative at the National Capital Chapter BoD meeting Wednesday.

    Cheers,
    Alan
    Alan,

    I'll be there tonight if you need me to say a couple of words on how beneficial the tool is.

    Jonathan
    Jonathan Thayer - jonathan.michael.thayer@gmail.com
    '99 Imola Red M Coupe, '08 Interlagos Blue Z4M Coupe

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 02-15-2008, 09:41 PM
  2. GVC BMW CCA 2008 Driving School Dates Available
    By dbonner in forum HPDE sponsored by Specr53.com
    Replies: 2
    Last Post: 12-20-2007, 05:00 PM
  3. Replies: 0
    Last Post: 07-03-2007, 03:21 AM
  4. Replies: 0
    Last Post: 07-02-2007, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •