Putting a 420g 6 speed in my E36, any undocumented tips or things I should know? Anyone want to lend a hand or moral support?
Rich Sperry
Printable View
Putting a 420g 6 speed in my E36, any undocumented tips or things I should know? Anyone want to lend a hand or moral support?
Rich Sperry
Haven't done it, but sounds like a cool project. Are you starting with a US spec 5spd M3 (most common as far as I know) or something else?
I'm putting it in my 1995 supercharged E36 M3, that I've owned since new. I kind of think of this as a good cleaning opportunity too..lol
When are you planning on doing the work...
Also, just out of curiosity, are you doing this for track/race purposes, or just for grins? Both answers are just fine of course... :) Have you run the numbers regarding weight change, gearing, etc?
I am certainly not a transmission expert, but I would want to make sure of actually seeing some benefit on the track or highway from the additional machinery for that extra gear before going to the trouble.
Sorry I'm late replying.
Work commences this Saturday. (Probably start on Friday, pulling the exhaust, and driveshaft.)
Why?... Good question, so here goes. With my 3.38 diff, it turns 3750 rpm at 80 mph. The 1-5 ratios are almost identicle, with 6th gear being a .86:1 overdrive. So it will have a lot less revs on the highway.
That and I wanted to put in a light weight flywheel, a new UUC SSK, and while I'm at it, a M5 clutch since the car makes 325 rwhp.
Wanna come watch?