325 AWD rotor replacement
Hi all,
I've heard it's very difficult to replace rotors on an AWD sedan. I have a 2003 325xi (an e46). I'm wondering if anyone has done this job themselves and has any advice? I looked online for a DIY but couldn't find anything. If you know of one, I'd appreciate the URL. I would save several hundred dollars if it's a doable job.
Thanks!
Brian
Possible culture change required
Finger Tight
The basic reason the "fastener in question" is there is to keep the rotor from dropping off and falling on your toes. (If and) when you replace the "fastener in question", torque it to only finger tight specs [i.e., use your fingers]. You can also use anti-seize compound to save yourself (or others) future outbursts of colourful language.
Hope this helps.
Slainte,
Alan :redface: