PDA

View Full Version : Chapter Event 08/04/2012 - DIY @ At Speed Motorsports



webmaster
02-06-2012, 01:40 AM
Aug 4 Do It Yourself (DIY) Program Overview
The 2011 Do It Yourself (DIY) program allows National Capital Chapter (NCC) BMW Car Club of America (CCA) Members to work on their own cars under the supervision of expert mechanics and technicians provided by the DIY Sponsor. The purpose of the DIY is to learn and practice proper maintenance and repair techniques that you can routinely complete within a two-and-one-half-hour (2.5 hour) time period.

There are typically several NCC members who can assist you when an extra pair of hands or advice is needed. We are happy to show newcomers the joys of working on your own car. Most events start at between 8 am and 9 am and typically finish at 3 pm. Lunch for the event is provided by the club.

The DIY Program Webpage is here http://www.nccbmwcca.org/content.php?119-diy
This event offers online registration and payment through MotorsportReg.com.

Registration will be through Motorsportreg.com (http://www.motorsportreg.com/index.cfm/event/event.advert/uidEvent/448CE378-99CF-4360-FF0F39D720BCD16A)

Topaz
07-02-2012, 06:55 AM
How do I find the location of these DIY service centers on this web site? thx

John in VA
07-02-2012, 07:30 AM
The Calendar of Events on the main site page tells you the shop that is hosting the DIY. You're right,though - a link to the facility/location would be helpful for those not familiar with them.
If you click on the "Register here" link at the bottom of the event page you will be taken to the MotorsportReg registration page where the DIY shop location is divulged.
http://www.nccbmwcca.org/content.php

tres
08-03-2012, 06:53 PM
supervision of expert mechanics and technicians provided by the DIY Sponsor

I wouldnt call these guys experts I had some tires installed and an alignment done at this shop last week and they destroyed my wheels and blamed it on the plastidip. The dumbass at the desk said they couldn't do anything until I spoke with one of the owners and a lady named Gabrielle when she saw the damage she set up an appt to have my wheels repaired. The tech who did the alignment said he couldnt get the car to specs which was -1.5 on both fronts and -1.75 on the rears with zero toe upfront. I told him that is unacceptable because I have GC camber plates and rear adjustable camber arms and had do it over. While im happy she agreed to repair them I dont think I will be taking my car there for service anymore.

PS im not saying dont take your car here just sharing my experience

John in VA
08-03-2012, 07:17 PM
tres - where was this? At Speed?

tres
08-03-2012, 10:17 PM
yes sir



tres - where was this? At Speed?

Zchild
08-04-2012, 01:45 PM
Another well executed Chapter DIY event hosted by AT-Speed, thanks to the great staff, owner and to all those who came out and participated. We had one BMW member from our sister chapter in Pennsylvania. He made the drive from King of Prussia, PA. It's the member's that make our chapter great, thanks for your continued program support.

tmcneish
08-04-2012, 04:43 PM
Photos from today's DIY...

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3610.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3609.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3608.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3607.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3605.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3604.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3601.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3600.jpg

http://i301.photobucket.com/albums/nn71/surfnsand1/2012_08_04%20DIY%20At%20Speed%20Motors/IMG_3599.jpg

schnitzer7
08-07-2012, 03:19 PM
Thanks to Zach and the entire BMW club for a pleasant DIY, in regards to the above bashing of our company by a board member, I will just leave it by saying if you apply some plastic/ rubber coating to your rims without any prep work (scuffing or sanding)it will NOT survive the mounting process. Cust was informed in advance that this was going to be a problem,as paint was peeling from the over spray on tire as soon as bead was broken. However, We agreed to fix the wheels but the customer did not show up for the scheduled appt. Thanks again all who attended.... Rich S.