Page 1 of 2 1 2 LastLast
Results 1 to 15 of 21

Thread: 01/16/2010 - DIY @ AtSpeed Motorsport

                  
   
  1. #1
    Senior Member
    Join Date
    Jan 2005
    Posts
    480

    01/16/2010 - DIY @ AtSpeed Motorsport

    AtSpeed Motorsport
    Hanover MD

  2. #2
    Junior Member
    Join Date
    Sep 2007
    Location
    Sykesville, MD
    Posts
    11
    Why is this DIY limited to fluid changes only? I spoke with Bob Miller, and he said he had told the coordinator that anything that could get done in the time allotted, fluid or mechanical, would be OK . . .

  3. #3
    Senior Member
    Join Date
    Sep 2006
    Location
    District of Columbia
    Posts
    195

    Exclamation 16JAN10 DIY @ At Speed

    Zoombie et al,

    Please be advised that the NCC DIY Program is run by the NCC DIY Committee, and that the single point of contact for questions is the DIY Chair, Phillip Cummings. Once the specific DIY Coordinator has been announced, he or she typically becomes the source of information.

    While we are very thankful to have our numerous DIY Sponsors (our program would not exist without them), our webpage DIY information states that members should not contact the Sponsor without first having spoken with the Chair or Coordinator. This process is not for us to be overly controlling; it's simply to maintain a single source of information. In past we've had enough instances of too many cooks spoiling the chowder.

    If you still have a question or concern, please contact Phillip Cummings; he can give you the most up-to-date information.

    Hope this helps.

    Alan
    DIYCom

  4. #4
    Member MPWR's Avatar
    Join Date
    Feb 2008
    Location
    Columbia
    Posts
    97
    The AtSpeed DIY is NOT limited to fluid changes. I have no idea why that was on the website, but it was in error.

    I am coordinating the event. We seem to have had some troubles with the website update during registration, but as a result we still have space available for the 1/16 DIY.
    Andy Miller
    1995 Avusblau M3
    1997 Alaskablau 318ti M Sport

  5. #5
    Junior Member
    Join Date
    May 2007
    Location
    Bethesda, MD
    Posts
    10

    New Web Site-Not Clear HOW To Register for DIY

    I'm fairly computer-literate yet cannot find the place on the new website (or even the old) to register for this event. Is it hiding in plain sight and I'm just missing it? Thanks...

  6. #6
    I am curious about the same thing. I have been searching and searching and to no avail.....Let me know so I can register for a good event

  7. #7

    Dinner after DIY

    To all of the DIYers coming to Charm City.

    A bunch of the local e24/e28/e30 plus a bunch of HPDE driving instructors et al are working on a dinner at Petit Louis in N. Balto for the same evening. If there is interest, please post here. I am trying to get a head count for the arrangements.

    The plan if it works is to arrive at Petit Louis early for a 1700 hour seating with enough time to inspect cars and of course have some friendly banter.

  8. #8
    Senior Member
    Join Date
    Sep 2006
    Location
    District of Columbia
    Posts
    195

    Exclamation How to Register for 16JAN DIY

    Note: This is a test message of information about DIY #1, and you will see another message from the DIY Chair.

    There are spaces available for this DIY. The coordinator for this event is Andy Miller; he can get you registered for the DIY. Information required
    • make/model/year
    • job you want to perform
    • Full name
    • home phone
    • work phone
    • email address
    Once you have e-mailed this information to Andy Miller, he can contact you with any additional questions, etc.

    Hope this helps.

    Cheers,
    Alan
    DIYCom
    Last edited by 1996 328ti; 01-07-2010 at 11:29 AM.

  9. #9
    How To Register for 16 JAN DIY

    Let me apologize for the website, it is being revised and updated and our registration process is not finalized. There are spaces available for the DIY. The coordinator for this event is Andrew Miller, he can get you registered for the DIY.
    Information required:
    Make/Model/Year
    Job you want to performe
    Full Name
    Home phone & email
    Email this info to Andrew Miller
    Regards
    Phillip
    DIY Committee Chair
    Last edited by 1996 328ti; 01-07-2010 at 11:29 AM.

  10. #10
    Junior Member
    Join Date
    Apr 2009
    Location
    Easton, MD
    Posts
    9
    This is my first DIY I'm hoping to attend - I have two questions:

    . I've looked every where for Andy Miller's email address, so I can register but I can't find it. Am I missing something?
    . I plan on doing some fluid changes and understand that I should buy the products from At Speed per DIY policy. Should I call them in advance to give them heads up on what I's like (hopefully they carry Redline stuff).

    Thanks!

  11. #11
    Member MPWR's Avatar
    Join Date
    Feb 2008
    Location
    Columbia
    Posts
    97
    Quote Originally Posted by 4DIMNZN View Post
    . I've looked every where for Andy Miller's email address, so I can register but I can't find it. Am I missing something?
    No, you're probably not going to find it. Please send me a Private Message through the forum and I will get in contact with you.

    You are certainty strongly encouraged to buy parts and fluids from At Speed. You should contact them tomorrow and order what you need. I believe Bob Miller (the owner) will be honoring the CCA discount. If he cannot get the parts/fluids you want, you can of course purchase them elsewhere and bring them.

    Andy
    Andy Miller
    1995 Avusblau M3
    1997 Alaskablau 318ti M Sport

  12. #12
    Member MPWR's Avatar
    Join Date
    Feb 2008
    Location
    Columbia
    Posts
    97
    Hey all-

    We're pretty well full for registration. I may be able to take a couple more walk-ups for fluid changes. Hours for the DIY will be from 0900 to 1430. I will not be assigning times for lifts- it will be first come, first serve. Please make sure to arrive early, and be prepared to give a hand if you're waiting for a lift. At Speed is in a large building, and if the weather is cold it may be cold inside- remember to dress warmly. Bob Miller is happy to help us with parts. At Speed stocks very little in the way of parts, so please order what you will need. Bob says that he should be able to have parts if they are ordered one or two days before the event. (And he carries Redline.)

    If you're not registered for the event, you are welcome to come hang out, help out, and join us for lunch. Bob would be very happy to show you around his shop- and some of the many cool cars he has on hand.

    Andy
    Last edited by MPWR; 01-08-2010 at 08:17 PM.
    Andy Miller
    1995 Avusblau M3
    1997 Alaskablau 318ti M Sport

  13. #13
    Junior Member
    Join Date
    Oct 2009
    Location
    Montgomery Village, MD
    Posts
    17
    Andy, I've volunteered at the past three DIY days since moving to the area from Michigan. If you could use a hand again, I'll gladly fill my trunk with tools and head over. I'll also send you a PM.

    -Greg
    89 735iA
    85 M639 (still in MI)

  14. #14
    Junior Member MBW635's Avatar
    Join Date
    Jan 2007
    Location
    Washington, DC
    Posts
    2
    Was there going to be a DIY on 1/23 at Convenience Car Care? Any idea on when the schedule will be updated past February? Looking forward to making it to one of these soon.

    Thanks!

    Maurice
    86 635

  15. #15
    Junior Member ///M44ti's Avatar
    Join Date
    May 2009
    Location
    Columbia, MD
    Posts
    18
    The 1/23 event at Convenience was cancelled. The schedule beyond the Feb. 06 event at EuroTech is still being nailed down with sponsors and will be released when we know it. We know when most of the events will be, but are filling a couple of holes.... Should be soon!
    I'm the only 4 cylinder in this village!
    Caroline Miller
    LDIY Co Chair
    '97 Alaska Blau 318ti
    '95 Avus Blau M3

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chapter Event 01/23/2010 - 2010 Holiday Party & Annual Meeting
    By pseto in forum Social RSVP
    Replies: 14
    Last Post: 01-24-2010, 07:42 AM
  2. Chapter Event 03/14/2010 - NCC Winter 2009-2010 Karting Event #9
    By webmaster in forum Karting
    Replies: 1
    Last Post: 01-10-2010, 07:10 AM
  3. Chapter Event 02/21/2010 - NCC Winter 2009-2010 Karting Event #7
    By webmaster in forum Karting
    Replies: 1
    Last Post: 01-10-2010, 07:09 AM
  4. Chapter Event 01/31/2010 - NCC Winter 2009-2010 Karting Event #6
    By webmaster in forum Karting
    Replies: 1
    Last Post: 01-10-2010, 07:08 AM
  5. Replies: 4
    Last Post: 09-20-2009, 09:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •