Results 1 to 1 of 1

Thread: How to connect do88 Racing Oil Cooler to new steal braided lines - 2012 e92 M3

                  
   
  1. #1
    Member VikAry's Avatar
    Join Date
    Mar 2016
    Location
    North Potomac, MD
    Posts
    43

    How to connect do88 Racing Oil Cooler to new steel braided lines - 2012 e92 M3

    Hi everyone,

    I just received my d088 cooling kit for my 2012 e92 m3 - https://www.do88.se/en/artiklar/bmw-...k-dkg-dct.html

    For the Oil Cooler, I purchased an Oil Diverter Value - http://www.bimmerworld.com/Epic-Moto...it-E9X-M3.html and at the suggestion of Bimmerworld, also purchased an inline oil thermostat - https://www.summitracing.com/parts/ear-501erl/overview/

    It's my understanding that the oil thermostat is required during street driving, particularly when it's cold. I can see the reasoning behind this because the diverter is going to force more oil into the larger cooler which will do its job to keep the oil as cold as possible. This is great when driving on the track or street in warm temperatures but in the middle of winter, the oil might never get to operating temperatures, thus causing issues in the motor. So for a few hundred $$$, it makes sense to install this thermostat and not risk having a more expensive issue with my motor.

    As shown on their website, the do88 oil cooler is really plug and play; i.e. it hooks right up to the stock lines. The issue is that the thermostat does not, requiring the following parts to make it all work:

    Steel Braided Hoses - https://www.summitracing.com/parts/e...8erl/overview/
    (4x) 8AN Swivel Seal Hose Ends which go on one end of the new hoses - https://www.summitracing.com/parts/e...8erl/overview/
    (4x) 8AN Port Adaptors which go into the four ports of the thermostat - https://www.summitracing.com/parts/ear-985081erl/

    What I can't seem to figure out is that type of fittings are needed to connect the do88 Oil Cooler to the 8AN hose ends and what fittings to use to connect to the oil filter housing.

    I've searched many forums but have not been able to find an answer. Any insight or guidance would be super helpful.

    Thanks - Vikas Arya
    Last edited by VikAry; 04-23-2018 at 03:28 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cooler left at May 22-23 Shenandoah school
    By wduvall in forum HPDE sponsored by Specr53.com
    Replies: 1
    Last Post: 07-12-2010, 02:46 PM
  2. 1988 M6: Where does this coolant overflow hose connect?..
    By ///MARINE in forum Do It Yourself
    Replies: 3
    Last Post: 08-28-2008, 11:11 PM
  3. Front SS brake lines = mush brakes, help
    By Torquewrench in forum Do It Yourself
    Replies: 8
    Last Post: 04-02-2006, 02:24 PM
  4. Thoughts on Socketless Hoses for oil lines?
    By SharkD in forum Do It Yourself
    Replies: 0
    Last Post: 01-11-2006, 04:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •