PDA

View Full Version : E24 Wheel Bearings



Bolton
09-13-2007, 03:06 PM
Greetings One and All,

My shark's been giving growls that I know are front wheel bearings. Figured I'd do the brakes while I was at it.

Does anyone here have a 46mm socket and a torque wrench that goes up to 250lbs/ft that I could borrow? I don't want to have to buy tools that I'll only use once. Of course if someone had the presser and the puller that would be great, too but those are a bit more specialized.

I was hoping to do this job down at Martin's on the 15th but I got to the registration a couple of days late.

I've been with the club since '89 or so (when I had Bavarias) so I'm not going anywhere.

If anyone is able to help out drop me a line at cavemacchiato at yahoo dot com.

Thanks,

Bolton
'87 635csi
'87 325
'86 K75C
'85 323i (in the barn)


'98 honda odyssey (hey, I got three kids)

Bolton
09-25-2007, 02:23 PM
Disregard request. Bought the S&K 46mm socket, 1/2" drive. Any member that wants to borrow it after I'm done should drop me a line. No sense in being a paperweight.