PDA

View Full Version : Camber Plate Installation



Dirichlet
09-02-2005, 09:20 AM
I recently purchased these..

http://www.turnermotorsport.com/html/detail.asp?PRODUCT_ID=193516

and intend to install them tomorrow.
I'm going to be honest here. I'm pretty new to the self-car-modification world, but I love it. I was wondering if anybody has any experience with this kit and/or general tips or advice when adjusting camber/caster.
Any help is greatly appreciated.

Pinecone
09-08-2005, 08:19 PM
a) Do you have spring comrpessors? You will need them

b) Do you have a camber guage? You cna't set it without it or taking it for an alignment.

c) Do you have a way to set toe? When you change camber, you change the toe.

Dirichlet
09-09-2005, 12:19 PM
a) Do you have spring comrpessors? You will need them
yes

b) Do you have a camber guage? You cna't set it without it or taking it for an alignment.
no

c) Do you have a way to set toe? When you change camber, you change the toe.
no...


Also - any reccomendations for removing the spindle bolt from the top of the struts - I had some repair work done on my car after an accident last fall, and they really over-tightened that bolt.

Pinecone
09-10-2005, 05:34 PM
I use an impact gun, but manyt will tell you this is not a good idea.